Komilfo Ultra S 10 mm, professional scissors with 2 springs, in a dichroic case

Description

Komilfo Ultra S scissors have a very comfortable ergonomic shape, sharp blades of medium length, a low heel.

The advantage of choosing Komilfo products:

• Komilfo has made an innovative development in nail clippers – an adjustable screw connection based on a 6-point screw with a key.
• The screw is made to order from a special, very strong and corrosion-resistant bronze.
• The scissors are made of steel grade 40×13 “medical stainless”.
• Milled from a single piece of steel.
• Manual robot.
• Have a smooth ride.

What does the term adjustable screw connection mean? Not the only, but the main problem, which makes it necessary to turn to the sharpener of a professional manicure tool (scalp), is the riveted connection. The rivet looses over time (play is formed), which does not allow the blades to converge in the correct position. The blades are displaced relative to each other, the scalp begins to tear and pull the skin. In this case, the problem is solved only by going to the sharpener, but the blades themselves may still be quite sharp, although it seems that the tool has already become dull.

• In the case of these scabbards, you can solve the backlash problem yourself.

Insert the wrench into the slot of the screw (the wrench is included) and turn it 1-3 degrees clockwise and the tool will work again as before.

If, after this procedure, the nippers began to jam (do not open under the influence of the springs), then you slightly pulled them. In this case, insert the wrench into the slot of the screw and turn counterclockwise 0.5-1 degrees. Thanks to the high precision adjustable screw connection, visits to the sharpener will be significantly reduced. Sharpening them, sooner or later, will be necessary, but much less often than with rivets.

• Can be disinfected in any solution and sterilized (heat treated).